WEICON Plastic Metal TI 0,5 kg，weicon 10430005

WEICON Plastic Metal TI 0,5 kg

This titanium-filled type is especially suitable for repairs which
require high compressive strength and extreme chemical resistance.
Suitable for:
- repairs of pumps, valves, wearing plates, ball bearing seats, shafts,
centrifugal pumps and propellers
- linings of pump cases, slide bearings, etc.

Item number	weicon 10430005
GTIN	4024596016784

Item features
Composition	Epoxy resin titanium-filled
Specific Properties	putty, wear resistant
Mixing ratio by weight % (Resin/Hardener)	100:33
Pot-life at +20°C (200 g preparation)	120 Min.
Density of the mixture	1,61 g/cm³
Viscosity of the mixture	550.000 mPa·s
Max. layer thickness per application	10 mm
Cure time mechanical loads	24 h
final hardness	48 h
Mean compressive strength (+25°C) acc. to DIN 53281-83	105 MPa
Mean tensile strength (+25°C) acc. to DIN 53281-83	35 MPa
Mean Flexural strength (+25°C) acc. to DIN 53281-83	100 MPa
Mean strength E-Modul (+25°C) acc. to DIN 53281-83	4.500 - 5.000 MPa
Shore D (+25°C) acc. to DIN 53281-83	80
Shrinkage	0,02 %
Thermoforming resistance	150 °C
Colour	grey
Temperature resistance	-35 to +200 briefly +260 °C