当前位置 : 公司主页 >> WEICON新闻 >> weicon新产品

WEICON Plastic Metal F2 0,5 kg,WEICON 10200020,WEICON F2

WEICON Plastic Metal F2 0,5 kg,WEICON 10200020,WEICON F2
WEICON F2 is highly recommended for making castings and in particular for:
- making moulds, forms and templates
- reconditioning porous or damaged castings
- making prototypes and holding devices
- pouring out swages to test their exactness
- low specific weight

Purchase data
Item number	WEICON 10200020
GTIN	4024596002503

Item features
Composition	Epoxy resin aluminiumfilled
Specific Properties	viscous
Mixing ratio by weight % (Resin/Hardener)	100:14
Pot-life at +20°C (200 g preparation)	60 Min.
Density of the mixture	1,45 g/cm³
Viscosity of the mixture	200.000 mPa·s
Max. layer thickness per application	10 mm
Cure time mechanical loads	16 h
final hardness	24 h
Mean compressive strength (+25°C) acc. to DIN 53281-83	43 MPa
Mean tensile strength (+25°C) acc. to DIN 53281-83	14 MPa
Mean Flexural strength (+25°C) acc. to DIN 53281-83	26 MPa
Mean strength E-Modul (+25°C) acc. to DIN 53281-83	1.500 - 2.000 MPa
Shore D (+25°C) acc. to DIN 53281-83	79
Shrinkage	0,025 %
Thermoforming resistance	55 °C
Colour	aluminium
Temperature resistance	-35 bis +120 °C